Global Point of Care
The purpose of this document is to provide instructions on how to use the Afinion 2 Web Server feature. This optional feature is included in Afinion Software release 21.13 and above. Users can use this feature to perform the following activities:
This section describes the prerequisite for the Afinion 2 Web Server.
Activities described in this section must be performed prior to using the Afinion 2 Web Server.
2. Touch 
icon from the Start-up menu to enter Main menu
3. Touch 
icon from the Main menu to enter Configuration menu
4. Touch 
icon from the Configuration menu to enter General setting menu
5. Touch 
icon from the General settings menu to enter Network setting screen
6. Touch 'web server' and then 
from the Network settings screen to start Web Server network configuration
7. Enter 192.168.1.5 for the IP Address2
8. Touch 
to confirm and continue to Network Mask
9. Enter 255.255.255.0 for the Network Mask
10. Touch to confirm and continue to Gateway
11. Enter 0.0.0.0 for the Gateway
12. Touch to confirm and continue to Host Name
13. Enter preferred Host Name
14. Touch to confirm and return to analyzer network setting view
15. Touch 
to confirm and return to analyzer network setting view
1. Open View network connections from the start menu
2. Right-click and select Properties on the connection that is connected to the Afinion 2 Analyzer.
Note: Administrator privileges are required to change the network settings.
3. Select “Internet Protocol Version 4 (TCP/IPv4)” and then click Properties from the Ethernet Properties dialog window.
4. From the Internet Protocol Version 4 (TCP/IPv4) Properties dialog box, select “Use the following IP address:” radio button, set IP address and Subnet mask to the following, and click OK:
5. Click OK from the Ethernet Properties dialog box to exit.
1. From the computer, open a web browser and type in the IP address of Afinion (see step 7 in section 3.2) on the address bar and press Enter
2. Enter a valid username and password when prompted to access the site (see section 2.3).
3. Main page is displayed upon login.
1. Select Configuration from the Web Server Main page
2. Update any desired fields from the Configuration page and click Update settings to save the changes to Afinion 2 Analyzer.
3. If desired, click Reset settings to default to reset network and connectivity settings back to default.
4. Select Software upgrade from the Main page
5. Click Choose File from the Software upgrade page to select the software upgrade file
6. From the file browser, navigate to the location of the software upgrade file, select the file, and click Open. Selected file name is displayed next to the Choose File.
Note: The upgraded software version must be equal to or higher than the existing instrument software version.
7. Click on the Upgrade software to upload and apply the software upgrade file. Upon completion of the software upgrade process, Afinion 2 analyzer is rebooted automatically.
Note: Progress bar indicates the software upload progress.
8. From the Afinion 2 Analyzer screen, confirm the software upgrade by touching the
9. Afinion 2 Analyzer Start-up menu is displayed upon completion of software upgrade and self-test. Verify that the upgraded software version is displayed on the Start-up menu
A Leader in Rapid Point-of-Care Diagnostics.
©2024 Abbott. All rights reserved. Unless otherwise specified, all product and service names appearing in this Internet site are trademarks owned by or licensed to Abbott, its subsidiaries or affiliates. No use of any Abbott trademark, trade name, or trade dress in this site may be made without the prior written authorization of Abbott, except to identify the product or services of the company.
This website is governed by applicable U.S. laws and governmental regulations. The products and information contained herewith may not be accessible in all countries, and Abbott takes no responsibility for such information which may not comply with local country legal process, regulation, registration and usage.
Your use of this website and the information contained herein is subject to our Website Terms and Conditions and Privacy Policy. Photos displayed are for illustrative purposes only. Any person depicted in such photographs is a model. GDPR Statement
Not all products are available in all regions. Check with your local representative for availability in specific markets. For in vitro diagnostic use only. For i-STAT test cartridge information and intended use, refer to individual product pages or the cartridge information (CTI/IFU) in the i-STAT Support area.
Abbott - A Leader in Rapid Point-of-Care Diagnostics.
